Able to log from Innovate Motorsports 2.Able to apply GND or 5V-25V to OBD pins 1,3,9,11,12,13 or AUX 2.5mm stereo connector.Standalone datalogs to microSD / microSDHC card without a laptop.J2534 PassThru support with Windows DLL.USB 2.0 full speed device (USB-A/Mini cable included).Choose the adapter you need from the 'Reflash Adapters' drop down list on the right side of this page. and clone Tactrix Openport 2.0 J2534 PassThru all day long working 100 tested 10+ ecu. New Openport 2.0+ wont be locked any more. For Mitsubishi, you'll need the adapter for most pre CAN vehicles which include the 5-9 Evo. Tactrix Openport 2.0+ can work for Toyota/ Ford/ Mazda/ JLR/ Subaru/ Mitsubishi. New PCB with inductance to increase voltage, suitable for tuning car under different voltages. New full chip new module plan, fast high speed transfer and very stable function. The OpenPort 2.0+ is capable of reflashing a large number of newer Subaru and Mitsubishi vehicles. No other Subaru vehicles require reflash adapters including Forester, Baja, Legacy, or naturally aspirated Impreza models. The OpenPort 2.0+ combined with our EcuFlash software. For Subaru you'll only need a reflash adapter for the 2001 through 2005 WRX, but not STi, unless you're working on an early non USDM STi in which case you made need one of our WRX adapters. We include a USB cable with each OpenPort, which is all the hardware you'll need unless you have one of the few vehicles that require a separate reflash adapter. Combined with our EcuFlash software, the OpenPort 2.0 is capable of reflashing a large number of newer Subaru and Mitsubishi vehicles, and support for other cars is in progress. The OpenPort 2.0 is our newest tuning tool hardware that is capable of communicating with most OBDII compliant vehicles using a standard J2534 interface.

Tactrix openport 2.0 clone